Facts About Modular Construction Part Three – Faster Installation
Installation of a Pier & Beam Permanent Modular Building
Whether it’s a pier and beam or a slab-on-grade building, both of Ramtech’s permanent modular construction approaches can be installed quickly in a matter of days, eliminating the weather delays that frequently plague site construction projects. Our pier and beam type permanent modular buildings can be installed either by using a crane, or by rolling them into place if the area has adequate space for maneuvering the individual modular sections. The accompanying images show how the rolling process works once the foundation has been completed and is ready to support the modular sections.
Installation of a Pier & Beam Permanent Modular Building
The modules are moved onto the grade beams, aligned with its adjacent section, lowered onto CMU blocks, then anchored and lagged together to form a complete building. Once an individual section is put into place it can be quickly weathered in at the seams to keep out the elements so the interior and exterior finish-out process can begin.
- Published in Ramtech News
Facts About Modular Construction Part Two – The Same Infrastructure as Site-Built
Underground Electrical Service for Permanent Modular Building
The extension and connection of utilities requires the same site work elements for relocatable and permanent modular buildings as it does for site built structures. (more…)
- Published in Ramtech News
Facts About Modular Construction Part One – Minimized Weather Delays
Pier and Beam Foundation for a Permanent Modular Building
One of the benefits of modular construction is the inherent ability to minimize weather delays on the job site. Since the structure is being produced offsite, the ability to quickly set the modules on the foundation and weather them in speeds up the entire construction timeline. This means there’s no waiting for the framing or erection and other onsite construction activities to take place – the typical site-built work elements that are subject to weather related delays. With modular construction, once you install it you can immediately begin performing the interior finish-out with no delays. This also keeps any weather related materials damage to a minimum.
Completing Duct Connections in a Permanent Modular Buil;ding
The Pier and Beam Permanent Modular Buildings that Ramtech is currently building for First Baptist Carrollton is a good case in point. Although the rainy spring made getting the foundations in place a challenge, once the first one was poured we were able to quickly get one of the two modular buildings placed on it. Then, as the pictures show, while the foundation for the second building was being developed we were already performing the interior work on the first building. With J&P Contractors Inc.
- Published in Modular Construction
Ramtech Completes Modular Building for Temporary Flying Squadron Facility at Vance Air Force Base in Enid, OK
Vance AFB Temporary Flying Training Squadron Facility
Ramtech recently completed a 17,284 square foot Temporary Flying Squadron Facility for the 33d Flying Training Squadron at Vance Air Force Base in Enid, Oklahoma. Procured using a five-year operating lease, the single-story modular building complex will be used for pilot training as part of a program aimed at increasing the graduation rate to address the shortage of pilots that currently exists within the U.S. Air Force. Ramtech worked with the 71st Mission Support Group and ASRCC, Vance AFB’s Base Operations Support contractor, to develop the project. (more…)
- Published in Government
New McKinsey and Company Report Adds to the Case for Modular Construction
Last month, McKinsey & Company published a comprehensive study of the growing impact of modular construction in the U.S and Europe. Titled, ‘Modular Construction: From projects to products‘, the study puts into focus what the commercial modular industry has long held to be the case. (more…)
- Published in Commercial, Modular Construction, Technology