Ramtech's Accelerated Building System (ABS) is our premier construction method for designing and constructing mid to large-sized permanent facilities. Developed as a comprehensive turnkey project delivery method, the construction part of the ABS process utilizes prefabricated sections which are manufactured with the ceiling and walls attached, but without a floor, then transported to the project site and crane set directly onto a conventional concrete slab foundation. This allows the concrete slab to become the floor of the structure just like a building that was completely done on site. After all of the prefabricated sections are set into place and welded to the foundation, the building is weathered in and the exterior and interior finish-out process can begin. The entire ABS construction process provides for:
Project video narrated by Steve Stege, Executive Pastor for the First Baptist Church of Frisco, in Frisco, Texas. The 23,386 square foot design-build project included installing three modular buildings for including a 6,750 square foot middle school student worship center with a 13 foot vaulted ceiling and 12 fellowship classrooms. The other two facilities include an 8,060 square foot 14 classroom adult education facility with a fellowship area, and an 8,576 square foot building with six classrooms and 14 private offices with adjacent administrative support areas for the ministry staff.